These patent pending Roll-n-Go shore ramps let you easily secure your boat on any gradually sloped shoreline. They are 17 feet long but may be extended with additional 8 ft. 6 inch roller sections. Their modular design make each section removable and portable with the removal of 4 bolts. Each section is less than 70 lbs.
Boat Ramp Docking Systems, shore docking, shore rail, boat roller, boat lifts, boat docks.
Made of all aluminum components with stainless steel hardware, these shore ramps are as easy to assemble as they are to use.
Both the standard hand winch or an optional two-speed braking winch come with a 25 foot strap and hook which will accommodate the 17 foot base system plus one additional 8 1/2 foot roller section.
Simply lay it out on your shoreline with the keel roller end in the water. You may secure the winch end to a wall, footing or use our easy screw-in style earth anchor kit.
This durable shore ramp has a manufacturers warranty of 5 years when used in fresh water and 2 years in salt water. It will work with any standard hull design and is rated for 2000 lbs. For specifications, click here.
Model 2000 for Boats - $2,059.
Optional 9' Roller Extension Kit - $979.
What if I have a seawall or bulkhead?
The only requirements are that you satisfy these criteria:
1. Stay within a steepness limit of 20-30% (depending on the weight of your boat)
2. The ramp must be supported
at both ends and every few feet either by resting on the ground
or other blocking.